PL EN
An Investigation to Estimate the Maximum Yielding Capability of Power for Mini Venturi Wind Turbine
 
Więcej
Ukryj
1
Department of Mechanical Engineering, Vel Tech Rangarajan Dr. Sagunthala R&D Institute of Science and Technology, 600 062, Chennai, India
2
Department of Electrical and Electronics Engineering, Christ the King Engineering College, 641104, Karamadai, Coimbarore, India
AUTOR DO KORESPONDENCJI
Sunil Kumar K.   

Department of Mechanical Engineering, Vel Tech Rangarajan Dr. Sagunthala R&D Institute of Science and Technology, 600 062, Chennai, India
Data publikacji: 01-05-2022
 
Ecol. Eng. Environ. Technol. 2022; 3:72–78
 
SŁOWA KLUCZOWE
DZIEDZINY
STRESZCZENIE
The present research work deals with the design and fabrication of windmill using venturi effect. The venturi effect is achieved such a way that the propeller rotation is increased about four times for the wind velocity in the surroundings. For any direction of wind flow, the propeller is rotated. The wind velocity required for power production in our research area is very less when compared with the existing systems. There are no effects on the birds and also there is reduction in noise level when compared with existing conventional wind mills. The wind enters the nozzle where its velocity is increased slightly. Hence the proposed idea is to overcome the difficulties in exisisting wind mills. From this experimental analysis it was understood that the maximum yield of power was increased by 12% nearly (800 to 1000w) compared to conventional windmills, which can be used essentially for domestic applications. The design in terms of cost and life was to be increased by 6% as compared to VAWT and HAWT. By the utilization of venturi wind turbines; the possibilities of facing real time problems such as resonance and sound intensity was decresed by 10 % as compared to conventional wind turbines.