ELECTROOXIDATION OF USED SYNTHETIC ENGINE OIL IN AQUEOUS SOLUTION OF H2SO4
| 1 | Uniwersytet Opolski, Wydział Przyrodniczo-Techniczny, Samodzielna Katedra inżynierii Procesowej, ul. Dmowskiego 7-9, 45-365 Opole |
CORRESPONDING AUTHOR
Paweł Piotr Włodarczyk
Uniwersytet Opolski, Wydział Przyrodniczo-Techniczny, Samodzielna Katedra inżynierii Procesowej, ul. Dmowskiego 7-9, 45-365 Opole
Uniwersytet Opolski, Wydział Przyrodniczo-Techniczny, Samodzielna Katedra inżynierii Procesowej, ul. Dmowskiego 7-9, 45-365 Opole
Publication date: 2017-02-01
Inż. Ekolog. 2017; 1:65–70
KEYWORDS
electrooxidationused synthetic engine oilelectricity productionfuelfuel cellrenewable energy sourcesenvironmental engineering
TOPICS
Technologies and equipment for the environmentWaste managementRenewable and non-conventional energy sourcesSustainable development
ABSTRACT
The paper presents possibility of using used synthetic engine oil to direct electricity production. The measurements conducted in the temperature range 293-333 K. Were measured electrooxidation of used synthetic engine oil emulsion on a smooth platinum electrode in an aqueous solution of H2SO4. The emulsion prepared on the basis of a nonionic surfactant Syntanol DS-10. The maximum current density reached the level of 22 mA/cm2 (temp. 333 K). Measurements shows possibility of direct electricity production from used synthetic engine oil emulsion, so powering fuel cell of this oil.
RELATED ARTICLE
